Control your Nibe (KNV) Heatpump with Loxone

The choice of paring Nibe Heatpumps with Loxone offers the possibility of:

integrating demand-based heating and cooling depending on e.g. presence or the protection of open windows
Interaction with the blinds for saving effects by passive cooling thanks to Loxone automatic shading
Active integration in interaction with e.g. PV- systems in a Loxone Energy Management
Using flexible electricity tariffs with the Spot Price Optimizer.
Use statistics ore individual notifications
Create your own individual schematics
Reduce cycles and operating hours of your Nibe Heatpump
Create e.g. yearly operation goals like certain annual runtime forces for hybrid systems e.g. (Heatpump 60% amount of energy, Gas heater 40% amount of energy) to fulfill the requirements of your local government.
Grid management according to §14a ENWG in Germany
In addition to the electrical power, the current and total thermal energy can also be visualized via the Loxone Energy Flow Monitor. To the compact overview for e.g. contractors.
Influence on the hot water circulation pump by controlling via the presence detectors.
Increased security through leakage detection or activation of IP cameras in the plant room.

_________________________________________________________________________________________________
Please note: The LAN cable is connected to the controller for the air/water heat pump and to the Touch control module for the brine/water heat pump

UseCase: Integration of a Nibe Topline S1156:

Commercial building with heating, cooling, heat buffer, warm water storage and heating circuit.
Device Brine/Water Topline S1156
Heating/Cooling buffer tank
Warm water storage tank --> Controlled by Loxone
Mixing circuit heating/cooling HC1 (e.g. ceiling heating/cooling) --> Controlled by Loxone